The Ultimate Guide to Install Exterior Motion Sensor Lights

 Exterior motion sensor lights are a benefit for any homeowner. they supply security and peace of mind, also as acting as a security feature. When the automated sensor picks up movement, the sunshine is triggered, illuminating dark spaces to point out potential dangers, like ice or other obstacles. These lights are an excellent investment for people coming and going in the dark, or maybe just to ease your worry once you hear a weird sound outside. you do not need to be an experienced handyman to put in them yourself, either. With some basic tools and a touch of your time, you'll add some strategically placed motion sensor lights to your home. electrician stores

Choose the sort of sunshine

Floodlights are common for exterior use on garages, homes, and other buildings. These lights provide ample illumination and are usually ready to suits the specified position.

Decorative motion sensor lights are available a good sort of styles and finishes, so you'll match them to your existing décor.

Prep for the New Light

Turn off the facility to the circuit at the breaker within the fuse box. this is often the only most vital step you'll take during this project, so don’t ignore it.

Remove the old light if necessary, and make sure the junction box that contains the wiring is secured to the house.

Mount the Fixture

Once wires are secure, attach the fixture to the junction box employing a screwdriver and therefore the screws provided. electrician supply store

If necessary, apply clear silicone caulking around the top of the junction box. Don’t apply it around the bottom, so if water does get in, it can escape.

Position the Sensor

Adjust the sensor to the specified field of view.

Set the Controls

Locate the controls under the sensor box.

Use the controls to preset the space range for the sensor and timer and automatic shut-off for the sunshine. electrical supply houses

Test the New Light

Turn the circuit back on at the fuse box to provide power to the new light.

Test the new light by activating the sensor.

Adjust the sensor or controls as necessary.