How to Replace an Outdoor Light

 The maximum essential element to recollect whilst running on any undertaking the usage of strength is to show off the electricity from the primary circuit breaker. Simply turning the mild off isn't always the equal element, as there may be nonetheless strength flowing to that circuit.

How to Replace an Outdoor Light

• Supplies Needed
• Power drill or screwdriver
• Outdoor mild fixture with mounting hardware 
• Level
• Wire snips, if necessary
• Wire connectors
• Electrical tape
• Caulk gun, optional
• Clear silicone-primarily based totally caulk, optional
• Light bulb, if now no longer furnished with mild fixture

Step 1: Remove Existing Light

Before you start any undertaking coping with strength, you MUST disconnect the electricity at your major circuit breaker panel or fuse field. Do now no longer reconnect till your undertaking is finished. Make certain your paintings place is dry earlier than beginning. Remove the present mild from the wall. The screws can be positioned beneath a mounting plate, which may be lifted off. Hold the mild fixture in region even as casting off the screws with a screwdriver or electricity drill. Lift the antique mild fixture off from the wall. While retaining the mild fixture, untwist the plastic twine connectors and cord ends to disconnect. new cree led bulb

Step 2: Replace the Mounting Bracket

A new mild fixture ought to include mounting hardware. Replace the antique hardware with the brand new mounting bracket. It’s essential to apply the bracket that got here with the brand new mild fixture, as such things as screw sizes and hollow orientation range with exclusive producers and models. Use a stage to make certain the crossbar is stage. Leave the floor bolt loose. 

Step 3: Wire the Outdoor Light

Wrap the floor twine a couple of times across the threading of the floor bolt close to the head, then tighten the floor bolt to secure. Connect the wires from the junction field to the wires on the brand new fixture in keeping with the manufacturer’s instructions. Connect black to black, white to white, and floor to floor via way of means of twisting the naked ends of the wires collectively clockwise.

If the twine ends aren't lengthy sufficient to curl collectively, use twine snips to trim a number of the plastic casing far from the twine. Use plastic twine connectors or electric tape to seal the ends of the wires. If you’re the usage of plastic twine connectors, make certain they're screwed on tightly. Give them a mild tug to make certain the wires do now no longer come apart. cree fixtures

You may need to wrap more than one inches of electrical tape across the base of the connector in which the wires meet for brought waterproofing. Carefully tuck all wires lower back into the junction field, ensuring none are poking out.

Step 4: Install the New Fixture

Attach the brand new mild fixture to the mounting bracket the usage of the furnished hardware. Thread any lockup knobs onto the right screws, and tighten to secure. Use a clean silicone-primarily based totally caulk and a caulk gun to seal the pinnacle and sides, if desired. Insert a mild bulb, if necessary, and flip the electricity lower back on from the primary circuit breaker.